feat: align frontend runtime and Edge TTS

src/features/workbench/data/scheduled-conditions.ts

@@ -92,7 +92,7 @@ const CONDITION_TASKS: ConditionTaskDefinition[] = [
   {
     id: "pump-energy",
     title: "泵站能耗检查",
-    summary: "检查泵组负载、单位排水电耗、启停频率和供压稳定性。",
+    summary: "检查泵组负载、单位供水电耗、启停频率和供压稳定性。",
     intervalMinutes: 60,
     durationMinutes: 10
   }
@@ -709,16 +709,16 @@ function createTaskKpis(task: ConditionTaskDefinition, signal: TaskSignal): Sche
     return [
       {
         id: "energy-deviation",
-        label: "单位排水电耗偏差",
+        label: "单位供水电耗偏差",
         value: energyDeviation.toString(),
         unit: "%",
         threshold: "关注 > 10%，异常 > 15%",
         status: getMetricRisk(energyDeviation, 10, 15),
-        description: "本轮单位排水电耗相对同窗基线的偏差。"
+        description: "本轮单位供水电耗相对同窗基线的偏差。"
       },
       {
         id: "unit-energy",
-        label: "单位排水电耗",
+        label: "单位供水电耗",
         value: unitEnergy.toString(),
         unit: "kWh/m3",
         baseline: "同窗经济运行区间 0.28-0.34",
@@ -780,10 +780,10 @@ function createDispatchInstructions(signal: TaskSignal): DispatchInstruction[] {
         action: "泵组组合优化",
         target: "1# 泵站 3# / 4# 泵组",
         command: "保持 3# 泵运行，延后 4# 泵启动 10 分钟，避免低效并联区间",
-        verification: "复核单位排水电耗是否低于 0.34kWh/m3"
+        verification: "复核单位供水电耗是否低于 0.34kWh/m3"
       },
       {
-        action: "高区排水边界收敛",
+        action: "高区供水边界收敛",
         target: "高区联络阀 HV-204",
         command: "开度下调 3%，减少高区向中区回流",
         verification: "确认高区末端压力不低于 0.22MPa"
@@ -819,7 +819,7 @@ function createDispatchInstructions(signal: TaskSignal): DispatchInstruction[] {
       {
         action: "阀门开度回退",
         target: "华山路沿线阀门组 VG-11",
-        command: "将昨日临时开度回退 2%，恢复常规排水边界",
+        command: "将昨日临时开度回退 2%，恢复常规供水边界",
         verification: "观察华山路和人民路支线压差不超过 2.5m"
       },
       {
@@ -911,7 +911,7 @@ function createGuidanceItems(
 
   if (task.id === "pump-energy") {
     return [
-      "关注单位排水电耗和启停频率，判断是否存在泵组组合不经济。",
+      "关注单位供水电耗和启停频率，判断是否存在泵组组合不经济。",
       "若电耗偏差持续升高，建议比较相邻泵组效率曲线并优化启停策略。",
       "调整前需确认供压稳定性，避免节能动作引发末端低压。"
     ];