EPANET/ReleaseNotes2_3.md

Release Notes for EPANET 2.3

This document describes the changes and updates that have been made in version 2.3 of EPANET.

• The check for at least two nodes, one tank/reservoir and no unconnected junction nodes was moved from EN_open to EN_openH and EN_openQ so that partial network data files could be opened by the toolkit.
• A EN_setcurvetype function was added to allow API clients to set a curve's type (e.g., EN_PUMP_CURVE, EN_VOLUME_CURVE, etc.).
• A EN_setvertex function was added to allow API clients to change the coordinates of a single link vertex.
• The index of a General Purpose Valve's (GPV's) head loss curve was added to the list of editable Link Properties using the symbolic constant name EN_GPV_CURVE.
• The EN_getlinkvalue and EN_setlinkvalue functions were updated to get and set the value of EN_GPV_CURVE.
• Negative pressure values for EN_SETTING are now permitted in the EN_setlinkvalue function.
• The EN_STARTTIME parameter was added into the EN_settimeparam function.
• A EN_DEMANDPATTERN parameter was added as the index of the default time pattern used by demands with no specific pattern assigned. It can be set or retrieved with the EN_setoption and EN_getoption functions, respectively, and is saved to file when the EN_saveinpfile function is called.
• The EN_getaveragepatternvalue function will now accept a pattern index of zero which represents the constant pattern assigned to junction demands by default.
• The adjustment of a tank's minimum volume (Vmin) when its parameters are changed using EN_setnodevalue or EN_settankdata has been corrected.
• A pump whose status is set to CLOSED in the input file now also has its speed setting set to zero which allows a simple pressure control activate the pump correctly.
• A failure to raise an error condition for a non-positve pipe roughness in the input file has been fixed.
• The calculation of head loss gradient for low flow conditions was corrected.
• Improved updating and convergence tests were added to pressure dependent demand analysis.
• Improved checks to prevent outflow from empty tanks or inflow to full (non-overflow) tanks, including the case where a link is connected to a pair of tanks, were added.
• The CI regression test protocol was modified by:
  • changing the absolute tolerance used to compare the closeness of test results to benchmark values from 0 to 0.0001
  • dropping the "correct decimal digits" test
  • dropping the check for identical status report content since it prevents accepting code changes that produce more accurate solutions in fewer iterations.
• A possible loss of network connectivity when evaluating a Pressure Sustaining Valve was prevented.
• Having the implied loss coefficient for an active Flow Control Valve be less than its fully opened value was prevented.
• A new type of valve, a Positional Control Valve (PCV), was added that uses a valve characteristic curve to relate its loss coefficient to its fraction open setting.
• A new set of functions have been added to get information about upcoming time step events. Users will now see what type of event is going to cause the end of a time step to occur. See ENtimetonextevent and EN_timetonextevent.
• A new set of functions have been added to allow users to set a reporting callback function. The user-supplied function will recieve all output normally directed to the report file.
• A EN_EMITBACKFLOW option was added that either allows emitters to have reverse flow through them (the default) or not.
• An incorrect tank elevation value set using EN_settankdata with SI units has been fixed.
• The EN_INITSETTING option in function EN_getlinkvalue will now return EN_MISSING for a valve whose initial status is fixed to EN_OPEN or EN_CLOSED.
• The functions EN_getnodevalue and EN_getlinkvalue now include the options EN_NODE_INCONTROL and EN_LINK_INCONTROL to determine whether a node or link appears in any simple or rule-based control.
• An error is no longer raised when a minor loss coefficient of zero is assigned in EN_setlinkvalue(ph, index, EN_MINORLOSS, 0).
• The incorrect display of unconnected nodes has been fixed.
• A header file for binding C# to the Toolkit has been added.
• A new error code 263 - node is not a tank is returned when EN_settankdata or EN_setnodevalue attempts to set a tank-only parameter for a non-tank node.
• The function EN_saveinpfile was corrected for simple controls on GPV's by saving their status instead of the index of their head loss curve.
• Support was added for Conan dependency manager.
• The internal Qualflag variable is now adjusted when an EPANET input file has a QUALITY option not equal to NONE and simulation duration of zero.
• Support was added for cubic meters per second (EN_CMS) flow units.
• An EPANET input file with a simple timer control that has more than 9 input tokens no longer results in an incorrect hour setting.
• Errors in node and link vertex coordinates are now ignored when reading an EPANET input file.
• Only non-zero demands are now included in the [DEMANDS] section of the input file produced by EN_saveinpfile.
• EN_SET_CLOSED and EN_SET_OPEN constants were added that can be used with EN_setcontrol to fix the status of pipes and valves to completely closed or completely open.
• EN_EMITTERFLOW can now be used with EN_getnodevalue to retrieve a node's emitter flow rate.
• EN_STATUS_REPORT can now be used with EN_getoption and EN_setoption to get or set the type of status report that EPANET will generate (EN_NO_REPORT, EN_NORMAL_REPORT or EN_FULL_REPORT).
• A possible parser error that could result in a Trace Node ID in an input file not being recognized was fixed.
• Additional API functions for enabling/disabling controls and rules were added.